Naja
Grundsätzlich ist es halt nicht so toll wenn vom Rahmen was weggebrochen ist.
Ob man sich Sorgen machen muss kann dir am ehesten ein Büchsenmacher beatworten. Aber wenn du weiter damit schiesst wirds sicher nicht besser.
Meines Wissens nach ist bei den späteren Sigs das Griffstüch verstärkt worden (Heavy Frame Version) Aber soweit ich weiß haben sie da die Schlittenführung verstärkt.
ICh schiesse aus meiner Sig nur schwache 9para mit leichtem Geschoss. Damit stosst sie weniger und es ist schonender für das Material. Ausserdem habe ich eine Rückstossdämpfer in der Federführungsstange verbaut. Die Sig ist so wie die Luger 08 zart gebaut. Darum sollte man keine harten Ladungen verwenden.
Die Bruchstelle liegt genau beim Schlitenfanghebel. Schon möglich dass es dort was zu Bruch klopft
Vielleicht hat der Vorbesitzer viele Stark geladene 9mm verschossen dass dort was weggebrochen ist.
hier findest du eine aufstellung der üblichen Schwachstellen
http://larvatus.com/tag/p210/sig p210 checklist
The SIG P210 is a remarkably rugged and durable handgun. Accordingly, the following checkup list is mostly applicable to Danish military m/49 variants likely to have been used with surplus submachine gun ammunition:
Cracks at the junctures between the frame and the rail housing, fore and aft; Cracks at the junctures between the slide and the dust cover, fore and aft;
Cracks inside the muzzle end of the slide, around the muzzle of the barrel;
Wear on barrel and slide coupling lugs;
Wear and cracks in the firing pin plate;
Chips in the extractor hook;
Eroded breech surface;
Peened or eroded firing pin tip;
Cycling wear on the muzzle end of the barrel;
Peening inside the frame, from contact with the dust cover at the end of the recoil cycle; and
Dings on the sights.
Wenn du auf nummer sicher gehen willst kannst du ein neues Griffstück nehmen.
zb hier
http://www.asamnet.de/~ehrenred/ersatzt/sig210.htmund hier
https://www.gunfactory.ch/faustfw/sigmain.htmIst aber sicher nicht ganz billig