Hat von euch wer Angaben zu der V0 dieser Patrone. Kann im WWW diesbezüglich nichts finden. Eventuell hat ja schon wer mal dies gemessen.
Vielen Dank vorab
Und nicht vergessen am Sonntag sind Wahlen zwischen einen Waffenbefürworter
![Neutral :at1:](./images/smilies/icon/neutral.gif)
![Naughty :naughty:](./images/smilies/eusa/naughty.gif)
![Liar :liar:](./images/smilies/eusa/liar.gif)
![Kopf antippen :tipphead:](./images/smilies/vogel.gif)
Wenns M193 ist, sollte das Ding 965+-12m/s auf 24m haben. V0 wäre dann ca 30m/s mehr.specs MIL-C-9963FCARTRIDGE, 5.56MM, BALL M193 (as of Sept 2007) hat geschrieben:3.6 Velocity. The average velocity of the sample cartridges, conditioned at 70 + 2 Fahrenheit (F), shall be 3165 feet per second (ft/sec) plus or minus 40 ft/sec, at 78 feet from the muzzle of the weapon. The standard deviation of the velocities shall not exceed 40 ft/sec.
Markus_H hat geschrieben:Wenns M193 ist, sollte das Ding 965+-12m/s auf 24m haben. V0 wäre dann ca 30m/s weniger.specs MIL-C-9963FCARTRIDGE, 5.56MM, BALL M193 (as of Sept 2007) hat geschrieben:3.6 Velocity. The average velocity of the sample cartridges, conditioned at 70 + 2 Fahrenheit (F), shall be 3165 feet per second (ft/sec) plus or minus 40 ft/sec, at 78 feet from the muzzle of the weapon. The standard deviation of the velocities shall not exceed 40 ft/sec.
Das ganze Rechnen und V erfragen ist ohnehin ungenau. Am besten messen, wie schnell die Dinger aus deiner Büchse gehen.