ES IST SOWEIT: Der PDSV Cup 2024 hat begonnen! Teilnahmebedingungen: viewtopic.php?f=53&t=58164
Der PDSV Cup dient zur Finanzierung des Pulverdampf Forums. Bitte unterstützt unser Forum, danke!

The Vang Comp System

Neuigkeiten aus der Welt der Lang-, Kurz- und Blankwaffen
Antworten
Benutzeravatar
snakedocter
massive poster
massive poster
Beiträge: 2847
Registriert: So 9. Mai 2010, 10:40

The Vang Comp System

Beitrag von snakedocter » Mi 4. Aug 2010, 18:05

Modifications to Shotgun Barrels

The Vang Comp System (VCS), designed by gunsmith Hans J. Vang, is a set of modifications to shotgun barrels. The alterations to the barrel consist of lengthening the forcing cone, back-boring the barrel, and adding compensating ports. With the VCS, accuracy significantly improves, felt recoil is dramatically reduced, and muzzle rise diminishes. By lengthening the forcing cone, the pellets have a smooth flow from the chamber to the bore. This prevents the pellets from bunching up in the barrel and reduces the felt recoil. In addition, the pellets do not become as deformed and keep a more consistent shape.
Bild

Higher Rate of Accuracy

With less deformation and a less turbulent flow, the pellets achieve a higher rate of accuracy. Back-boring the barrel is accomplished by boring the barrel from the chamber towards the muzzle creating a choke where there was none. Back-boring is a key portion of the VCS modification and aids in both increasing accuracy and reducing felt recoil.

Compensating Ports

Probably one of the most important and most obvious parts of the VCS are the compensating ports. Some of the gases, created by the burnt powder exiting the muzzle, vent upward through the ports. This redirected gas flow helps prevent the muzzle from rising and allows for both increased accuracy and a more rapid recovery time between shots. Also, the ports reduce muzzle flash, which in turn helps to retain night vision and keep the shooters location less conspicuous in low light conditions.

Reduce Felt Recoil By About 15%

In combination, the lengthened forcing cone, the back-boring, and the compensating ports make up the Vang Comp System. The VCS has been estimated to reduce felt recoil by about 15%. The increase in accuracy is dramatic. For example, patterns using 9 pellet 00 buck are as tight as 2 3/4" at 15 yards and 10 to 12" at 25 yards. Also of note, all modifications, except the compensating ports, are internal.

Maximize Performance

No extra parts are added to the barrel. Thus, the VCS barrel requires no maintenance other than normal cleaning. Also, other types of specialty ammunition, such as slugs, can be used in the Vang Comp System. The VCS, developed to maximize performance of the tactical shotgun for Law Enforcement and Military applications, is covered by three U.S. Patents. Currently only Mr. Vang's Arizona facility produces the VCS.
https://www.vangcomp.com/Home.html
Bild
Can't save the world? Then prepare for its END!

Benutzeravatar
doc steel
MUSCLEGUNNER
MUSCLEGUNNER
Beiträge: 11210
Registriert: So 9. Mai 2010, 11:02
Wohnort: Ich bin jetzt immer da, wo du nicht bist Und das ist immer Delmenhorst

Re: The Vang Comp System

Beitrag von doc steel » Sa 7. Aug 2010, 10:13

snakedocter hat geschrieben:Modifications to Shotgun Barrels

.... is a set of modifications to shotgun barrels.


d.h. ich kunntert ma das am lauf meiner favorisierten benelli m4 von einem gschickten bixnmacher nachmachen lassen?

Benutzeravatar
sandman
.50 BMG
.50 BMG
Beiträge: 3773
Registriert: Mi 12. Mai 2010, 21:54
Wohnort: Wien

Re: The Vang Comp System

Beitrag von sandman » Sa 7. Aug 2010, 10:50

Zugegebenermaßen habe ich keine Erfahrung mit HA Flinten, aber bei meinen BDFs wäre das absolut sinnlos, da sie gar nicht springen und der Rückstoß, auch bei stärker geladener Jagdmunition, relativ harmlos ist (Jawohl, ich meine 12/76).

Ähnliche gibt es auch auf der Stoeger Home Defense Flinte und die Magna Ports von Blaser schauen auch nicht viel anders aus, so von wegen einzigartig.....

Grüße

Sandman

@docsteel: лизать мне в задницу? ёб твои мать! (просто шутка)
.357mag, .45ACP, .22lr, .243win, 7x57, 7x64, .303Brit., .308win, 7,62x54R, .30-06, .300 Styria Magnum, 8x57IS, .338Lap.Mag., 11x36R, 16/70, 12/76, 10/89

Antworten